Anodized Machined Pads

Marine Pads have #14 / 1/4″ hardware and bright dipped anodized.

DiameterBrushedPolishedHolesPattern
2 1/2"PRB-2.5DPR-2.5D3 HoleStandard
2 3/4″PR-2.75D3H-903 Hole90°
3″PRB-3D3HPR-3D3H3 HoleStandard, 90°
3 1/2″PRB-3.5D3HPR-3.5D3H3 HoleStandard, 90°
PRB-3.5D4HPR-3.5D4H3 HoleStandard
4″PRB-4D3HPR-4D3H3 HoleStandard
PRB-4D4HPR-4D4H4 HoleStandard
4 1/2″PRB-4.5D3HPR-4.5D3H3 HoleStandard
PR-4.5D4
PR-4.5D4HS
4 HoleStandard
Offset*
5″PRB-5D3HPR-5D3H3 HoleStandard
PRB-5D4HPR-5D4H4 HoleStandard
5 1/2"PR-5.54H4 HoleStandard
6"PR-6D5H5 HoleStandard
PR-6D5H 3/8" Thick
PR-6D5HS-3/8" Thick
5 HoleStandard
Offset

*Also available in offset pattern

1/4″ thick and 3/8″ thick

Special offset hold pattern is now available. Drill & countersunk for 5/16″ hardware & is 3/8″ thick.
Application: Where you need a four hole but have very limited room.

DiameterBrushedPolishedCenter Hole Dia.
3 Hole
4"PROB-4D4HPRO-4D3H1 1/4"
4 1/2"PROB-4.5D4HPRO-4.5D3H1 1/2", 1 3/4"
4 & 5 Hole
4"PRO-4D4H1 1/4"
4 1/2"PRO-4.5D4H1 1/2", 1 3/4"

*The hole in the middle is machined to the customer’s requirements, be sure to specify hold diameter when ordering.

Center hole is designed for wire chase applications.

SizeBrushedPolished
1 1/2 x 3 1/2PRTP-1.5X3.5
2 x 4PRT-2X4PRTP-2X4
2 1/2 x 4PRT-2.5X4PRTP-2.5X4
3 x 4PRTB-3X4PRTP-3x4
3 3/4 x 5 1/2PRT-3.75X5.5PRTP-3.75X5.5
4 x 6PRT-4X6B

Typical usage: Bow rails, T-Tops and Leaning Posts

SizeBrushedPolished
3 x 4PHSB-105PHSP-205
3 x 4 3/8PHSB-106PHSP-206
4 x 6PHSB-103APHSP-203
4 x 6PHSB-102PHSP-202
4 x 6PHSP-201
Center Hole 1 1/4"
3/8" Thick

Other suggested usages: T-Tops, Learning Posts, Poling Platforms and Towers.

SizeBrushedPolished
2 x 3PTDB-2X3PTDP-2X3

Typical usage: Hand, grab and bow rails

SizeBrushedPolished
2 x 3-1/2PDMB-2X3.5PDMP-2X3.5
2 x 4-1/4PDMB-4.25

Typical usage: Hand, grab, bow and stern rails, ladder ends

SizeBrushedPolished
2 x 3-1/2POVB-2X3.5POVP-2X3.5
2 1/2 x 4POVB-2.5X4POVP-2.5X4

Typical usage: Hand, bow, and stern rails, ladder ends

SizeBrushedPolished
3 x 4PHTB-3X4PHTP-3X4
PHTP-3x4 CH
1 1/2" Center Hole

Typical usage: Hand and bow rails, ladder bases