Other Items

Home » Other Items

SizeLengthBrushedPolished
3/4"6"SL75X6
1"6"SLB-1X6SL-1X6
1-1/4"6"SLB-1.25X6SL-1.25X6
1-1/4"8-1/2"SLB-1.25X8.5SL-1.25X8.5
1-1/4"10"SLB-1.25X10SL-1.25X10
1-1/2"6"SLB-1.5X6SL-1.5X6
1-1/2"8-1/2"SLB-1.5X8.5SL-1.5X8.5
1-1/2"10"SLB-1.5X10SL-1.5X10
1-1/2"12"SLB-1.5X12SL-1.5X12
2"6"SLB-2X6SL-2X6
2"8"SL-2X8
2"10"SLB-2X10SL-2X10
2-1/2"10'SL-2.5X10P

All sleeves will fit over the outside of the dimensionally correct nominal pipe size being used. Sleeves are polished or brushed finished to match pipe and then bridge dip clear anodized.

Part NumberSizeMaterial
PECA-.753/4"Aluminum
PECA-11"Aluminum
PECA-1.251-1/4"Aluminum
PECA-1.51-1/2"Aluminum
PECA-22"Aluminum
Part NumberSizeMaterial
*OEC-1.51-1/2"Aluminum
*OEC-1.8751-7/8"Aluminum
*OEC-33"Aluminum
*OEC-44"Aluminum

*Denotes round end cap

Part NumberSizeMaterial
PECP-.753/4"Plastic
PECP-11"Plastic
PECP-1.251-1/4"Plastic
Part NumberSizeMaterial
FECA.753/4"Flat End Cap
FECA.75 3/8"3/4"Flat End Cap with 3/8" threaded hole
FECA11"Flat End Cap
FECA11"Flat End Cap with 3/8" threaded hole

SizePart Number
12" x 12"MPB-12X12
12" x 24"MPB-12X24
1/4" x 12" x 48"MPB-12X48

Custom brackets, braces, mounting plates, radar arches.

Part NumberDescriptionSize
ANT-4X4Antenna Pad4 x 4 1/4
ANT-2X3Antenna Pad2 x 3 1/4
2X2Light Tab2X2

This pad is used for the mounting of antennas. Other possible usages could be to mount all different types of lights. The pad is polished to a mirror finish and bright dipped anodized.

Part NumberSizeFinish
MA-42" x 2" x 4"Brushed
MAP-42" x 2" x 4"Polished
MAP-62" x 2" x 6"Polished
MAP-82" x 2"x 8"Polished

Drilled and countersunk for #14 hardware.

Alignment Pin Set for Folding Towers

Part NumberSize
APFT-11"
APFT-1.251-1/4"
APFT-1.51-1/2"
APFT-22"
HBSA-1.75X4.251 3/4" X 4 1/4"

The perfect way to relocate folding towers each and every time you fold the upper station.

**This item works with the Hinge Bracket Assembly**

This hinge bracket assembly comes complete with hardware (SST) and 4 nylon washers.

Halyard Tip with Eye End – Polished

SizeColorPart Number
3/4"ClearHT-.75C
1"ClearHT-1C

Designed to fit 3/4″ and 1″ schedule 40 pipe. Overall length is 3″ wide 2-1/4″ exposed.

Part Number
Gimble

But end for rod holder. Fits 1″ pipe used for making bait cutting trays and other components.